When the discharge pressure of the gear pump increases, the leakage loss in the pump increases, so the actual flow rate of the pump decreases slightly with the increase of pressure.

The residue oil pump is also often used in our daily work, and its operation is very simple. If the working pressure of the pump drops for a certain period of time, we can adjust the internal gear face clearance of the pump through the external fine-tuning structure on the pump cover to restore the working pressure of the pump. This operation can be adjusted several times, so its service life is several times longer than that of the general gear pump.

Stainless steel cam type double rotor pump base adopts stainless steel plate design, there are 2 universal wheels and 2 fixed wheels under the base, the handle adopts stainless steel 304 pipe design, which can be pushed at will, the front can be pushed on the base, and the back can be dragged. 2 holes are designed before and after the design, and the handle can be taken off to the other end for convenient and quick design.

Cam rotor pump product characteristics this series not only has the same use and characteristics of other rotor pumps, but also has its unique use. Cam rotor pump is suitable for transporting high viscosity heavy oil, crude oil, residue, Huai grease, rubber, glass fiber and asphalt at 0.02~100Pa.S temperature below 200C.

The mechanical energy input by the main shaft of the cam rotor pump is converted into the pressure energy of the transported fluid through the pump.The flow rate of the cam rotor pump depends on the volume value of the working cavity and its changing frequency per unit time, but has nothing to do with the discharge pressure.

So in the end in which aspects of the high-quality food-grade stainless steel rotor pump company has a good performance, the following is a brief introduction to this problem, hoping to bring help to people in need.