English
English 中文
Wholesale QBY Pneumatic Diaphragm Pump QBY Air Operated Diaphragm Pump QBY Air Operated Double Diaphragm Pump In Stock QBY Pneumatic Diaphragm Pump
  • Wholesale QBY Pneumatic Diaphragm Pump
  • QBY Air Operated Diaphragm Pump
  • QBY Air Operated Double Diaphragm Pump
  • In Stock QBY Pneumatic Diaphragm Pump
Wholesale QBY Pneumatic Diaphragm Pump
Wholesale QBY Pneumatic Diaphragm Pump
QBY Air Operated Diaphragm Pump
QBY series pneumatic diaphragm pumps combine the advantages of self-priming pumps and slurry pumps, and are particularly suitable for high-fluidity and low-fluidity liquids. The products contain no rotating parts, shaft seals or diaphragms, and the moving parts and workpieces are completely separated from the medium. Our products have excellent leakage protection and can be used to transfer toxic, volatile or corrosive media.
Head Lift: 0-50m
Suction: 5-7m
Max Air Pressure: 7kbf/cm 2
Product Description
Summarize:

QBY series pneumatic diaphragm pump is a positive displacement pump, it uses compressed air as the power source, for a variety of corrosive liquids with particles, high viscosity, volatile, flammable, highly toxic liquids can be pumped exhaust. The material of pump body overflow parts is stainless steel, aluminum alloy, cast iron, and the diaphragm adopts four kinds of butyl rubber, fluorine rubber, neoprene rubber, and polytetrafluoroethylene according to different liquid eyes.

 
Product Details:
The two symmetrical working chambers of the diaphragm pump are each equipped with a piece of elastic diaphragm, and the two pieces of diaphragm are combined into one by connecting rod. Compressed air from the pump inlet connector into the valve chamber, push a working chamber of the diaphragm, and driven by the connecting rod connected to the diaphragm synchronized movement, while the other working chamber of the gas from the back of the diaphragm discharged. When the piston reaches the end of the stroke, the valve mechanism automatically introduces compressed air into the other working chamber and pushes the diaphragm pump to move in the opposite direction, thus forming a synchronized reciprocating motion of the two diaphragms. Each working chamber is equipped with two ball valves, the reciprocating motion of the diaphragm causes changes in the volume of the working chamber, forcing the two ball valves to open and close alternately, thus realizing the continuous suction and discharge of liquid.




 
Application:
1. Air operated diaphragm pumps can be used for the treatment of sewage and waste oil in drains and sewers.
2. The gas residue and acidic water at the bottom of refineries, which need to be centralized, our diaphragm pumps can be used to transport these waste liquids.
3. This machine can be used to pump glaze slurry in the ceramic industry.
4. In the petroleum refining process, oil often needs to be poured, loaded and sampled temporarily, in order not to contaminate the normal pipeline, diaphragm pumps can be a temporary substitute to get the job done quickly and easily.
5. The diaphragm pump can be used to transport naphthenic acid, sodium sulfite liquid and benzene.
6. It can convey all kinds of highly toxic, flammable and volatile liquids, as well as all kinds of strong acid, alkali and corrosive liquids.

Feature:
1. No need to irrigate and draw water, the suction range can be up to 5m high and the head can be up to 50m long.
2. Large flow rate, good performance, allowing the largest particles through the diameter of 10mm, in the pumping of mud, impurities on the pump damage is very small.
3. The head and flow rate can be steplessly adjusted by pneumatic valve opening (pneumatic pressure adjustment range of 1-7bar).
4. The diaphragm pump has no rotating parts, no bearing seal, the diaphragm will pumping medium and pump running parts, the working medium is completely separated, the conveying medium will not leak, so in the pumping of toxic, flammable, corrosive media will not cause environmental pollution and human safety hazards.
5. without electricity, in flammable, explosive places to use safe and reliable.
6. It can be immersed in the medium.
7. Easy to use, reliable work, only need to open or close the gas valve when starting or stopping.
Performance Data: 
Model Flow
(m 3 /h)
Pressure
(kgf/cm 2)
Suction
(m)
Max Solid Size
(mm)
Max Air Consumption
(m 3 /min)
Material
Aluminum ally ss304 Cast iron FRPP
QBY-10 0~0.8 5 5 1 0.3 Yes Yes Yes Yes
QBY-15 0~1 5 5 1 0.3 Yes Yes Yes Yes
QBY-25 0~2.4 5 7 2.5 0.6 Yes Yes Yes Yes
QBY-40 0~8 5 7 4.5 0.6 Yes Yes Yes Yes
QBY-50 0~12 5 7 8 0.9 Yes Yes Yes /
QBY-65 0~16 5 7 8 0.9 Yes Yes Yes /
QBY-80 0~24 5 7 10 1.5 Yes Yes Yes /
QBY-100 0~30 5 7 10 1.5 Yes Yes Yes /
Inquiry
Welcome to send your requirement and we will contact you in 24h.
Name:
Country :
*Email:
Phone :
*Message :
Home
Products
Inquiry
WhatsApp