Before the first start-up of the screw pump, the mud collection pool and mud pipeline should be cleaned to prevent stones, cement blocks and other metal objects from falling during construction from entering the crusher or pump. Usually, you should open the inlet and outlet valve before starting and make sure that the pipeline is unobstructed.

Fault Analysis of Gear Oil pump.1. Oil seal wear and glue seal aging.2. Wear of oil pump shell.3. Wear of internal parts of oil pump.It is not suitable to work under over-rated pressure, which will overload the prime mover, increase the bearing load, deform the working parts, increase friction and leakage, and cause blockage in serious cases.

The scope of application of high viscosity pump:food industry,daily chemical industry,pharmaceutical industry,chemical industry,construction industrym,other industries.

Unscrew the drain plug on the suspension, remove the lubricating oil, and remove the motor. Loosen the connecting bolt of the pump body and the bearing body, and separate the impeller, the shaft seal body, the bearing body and the pump body. Loosen the impeller nut and remove the impeller and part keys.

Screw pump is usually divided into single-screw pump, double-screw pump, three-screw pump and five-screw pump according to the number of screws, each has its own advantages, and there must be a choice in popularization and application.

(1) when the temperature of the working liquid increases, the viscosity of the working liquid decreases, the leakage of the pump increases, and the actual flow rate of the pump decreases.(2) the seals of hydraulic systems and components deteriorate at high temperature, the elastic denaturation ability decreases, the sealing performance decreases, even the seal fails, and the leakage increases.