NYP series gear oil pump is divided into insulation type and non -insulation type viscosity pump can use all non -solid particles for high viscosity media.

This kind of stainless steel gear pump often has problems such as easy leakage of the seal, poor wear resistance, poor self-priming, and short service life when transporting high-viscosity food-based media. Only by choosing the material of the stainless steel gear pump reasonably, actively improving the processing technology of the stainless steel gear pump, and improving the processing precision and assembly precision of each part of the stainless steel gear pump, can we meet the actual needs of our customers.

The flow parts of the pump are made of high-performance wear-resistant materials, ductile iron, tungsten carbide, tool steel, etc., and a special heat treatment process is adopted to ensure that the surface hardness of the flow parts of the pump reaches HRC58 or higher, which not only ensures high resistance The grindability has the toughness of steel parts, which improves the comprehensive mechanical properties of the material, so as to realize the long life of the pump.

The customer's newly ordered 3RP food-grade rotor pump is about to be packed and shipped！

Causes of gear pump rotation jam.1. The axial clearance or radial clearance is too small. Re-adjust and repair.
2. There is dirt in the pump. Disassemble to remove foreign objects.
3. The assembly is incorrect. The machining datum plane of the two pin holes of the gear pump is not the assembly datum plane. If the pins are driven in first, and then the screws are tightened, the pump will not rotate. The correct method is to tighten the screws while turning the gear pump, and finally drill the pin holes and drive the pins.

The AY single two-stage centrifugal pump is modified and redesigned on the basis of the old Y-type oil pump series. So if you want to extend the service life of the AY single two-stage centrifugal pump, you must do a good job of daily maintenance and maintenance on the basis of correct use.