Why Choose HW Series Mixed Flow Centrifugal Pump for Irrigation?
2025-03-06 15:55:33
Read:
Share:
HW series mixed-flow centrifugal pump is a horizontal single-stage single-suction turbine-type mixed-flow pump, which is usually suitable for conveying clear water or other liquids with physicochemical properties similar to water. The flow rate of the pump is 90-9000m3/h, the head is 3.5-22m, and the temperature of the transported liquid should not be higher than 50 degrees Celsius. Therefore, the pump can be used as ideal equipment in a variety of fields such as farmland irrigation, industrial and urban drainage. HW series centrifugal water pump is mainly composed of pump cover, impeller, pump body, pump shaft, shaft sleeve and bearing bush and other main parts. In order to prevent air from being sucked into the pump and to prevent liquid from flowing out of the pump too much along the shaft, the shaft sealing device is composed of packing, packing gland, packing ring and other wear-resistant parts.
The flow rate and head of HW series centrifugal pump are between the centrifugal pump and axial flow pump, adopting an advanced hydraulic model and optimized vane design, so it can maintain high efficiency in a wide range of flow rate, which can be applied to a variety of working conditions. At the same time, the pump has high efficiency and low energy consumption, which has an obvious energy-saving effect compared to the traditional single-stage centrifugal pump and multi-stage centrifugal pump. HW series mixed flow water pump adopts a compact design and a small number of parts, which is easy to install and maintain, thus reducing its production costs and maintenance difficulties. Moreover, the pump is small in size and light in weight, which is easy to install and use in different occasions, especially suitable for places with strict space requirements.The rotor of HW centrifugal pump is made of wear-resistant and durable material, so the rotor of the pump will not be bent because of the load, which ensures the best service life of the bearings. In addition, in order to reduce the possibility of obstruction in the conveying process, the pump is designed with a large overflow area, which can be able to convey liquids containing certain impurities. HW series horizontal centrifugal pump has the characteristics of simple structure, reliable use, easy maintenance, high efficiency, small size, light weight, etc. It is the ideal equipment in agricultural irrigation and paper mills, and it can also be used as the best choice for flood discharge and rainwater discharge.
