The KCB gear pump is a kind of higher-flow, low-pressure external gear pump, it is designed for the transfer of lubrication fluids with high viscosity. The gear pump design's self-priming feature makes it perfect for situations requiring challenging suction circumstances, such as long-distance fluid pumping or situations where the pump is positioned above the fluid. Therefore, this machine is designed for handling larger volumes of fuels and oils.
KCB oil gear transfer pumps are increasingly used in other industries. On the one hand, this machine adopts a long-coupled design to make it convenient to maintain. This means you can directly get to the pump head without removing the motor. On the other hand, the pump head is equipped with extra bearings to share the stress during the operation for extending its service life.
What do I need to pay attention to when operating a KCB gear oil pump?
1. Before running, the gear oil pump should verify the motor steering, flange and joint sealing. At the same time, carefully check whether the valves are switching correctly, prohibit the pump outlet pipeline valves open in the case of starting the oil pump, in order to avoid accidents.
2. Clean the filter regularly to avoid clogging and affecting the flow. Often check and adjust the safety valve relief pressure.
3. The pump speed should be from low to high, slowly accelerate, and maintain the corresponding speed, not arbitrarily over-speed operation, and not high and low.
4. Pump in operation, should pay attention to observe the pressure gauge and vacuum gauge readings, such as the pressure gauge readings are too large, indicating that the pump outlet pipe blockage, such as the vacuum gauge readings are too large that the suction pipe clogging so that the pump cavitation.
5. If the KCB oil transfer pump is in a state of long-term non-use, it is necessary to do a good job of rust-proof treatment, proper storage.
6. Grease the bearings every six months.
7. The pipeline should have a pipe rack, the pump is not allowed to bear the load of the pipeline, the installation height of the pump should not exceed the allowable self-priming height of the pump work.
What are the main applications for KCB gear pumps?
The electric KCB oil gear pumps are commonly used for pumping high viscosity fluids such as oil, paints, resins or foodstuffs. They are preferred in any application where accurate dosing or high pressure output is required. The output of a gear pump is not greatly affected by pressure so they also tend to be preferred in any situation where the supply is irregular.
1. In all industrial fields, KCB series gear oil pumps can be used as lubricating oil pumps. It can be used as an increase pump in oil transmission system, and can be used as a fuel pump for conveying, pressurising and injecting in fuel system.
2. In the chemical industry, it can be used with special high viscosity gear pump for conveying more viscous chemical medium.
3. This machine can replace the gear pump material for stainless steel, conveying liquid type food with fluidity, fully ensure the hygiene and safety of food.
