Notes for operation of liquefied petroleum gas pump
2022-11-10 17:24:04
Read:
Share:
The liquefied petroleum gas pump is mainly used when the liquefied petroleum gas is loaded and unloaded. Because the liquefied petroleum gas is flammable, it must be operated in accordance with the correct method. And some matters needing attention in the operation process are also what we need to pay attention to.
1. When the pump stops using for a long period of time or the new equipment is used, the first thing to do is to manually rotate the belt wheel for two turns to make sure that there is no abnormality before starting the vehicle. After starting the equipment, it is necessary to check whether the direction of rotation is correct.
2. Must not idling, so that the internal wear of the equipment is relatively large, there is the LPG pump used when the wire should also be grounded.
3. When the liquefied petroleum gas pump is running, it is necessary to observe whether it is in a stable state. In addition, if abnormal sounds are found during the operation of the equipment, it is necessary to stop the operation in time, and start it after checking all aspects of the equipment.
4. When the equipment is started for extraction, the gas in the pump must be cleared out before use, so as to avoid the efficiency of extraction can not reach a better state when it is used.
5. The pressure gauge used by the LPG pump needs to be handled in time if any abnormal situation is found when it is used.
The above is the introduction of some operation precautions of LPG pump, but also pay attention to avoid friction with metal objects, in peacetime use to stop working to do a good job of equipment maintenance, only in this way can ensure that the equipment is in good condition when used.
