When the high viscosity lobe pump flow pressure is insufficient how to solve?
2022-11-16 16:33:41
Read:
Share:
When the rotor pump flow is insufficient, first check and analyze the causes of insufficient flow pressure one by one, in order to find a solution. Today for you to sort out some of the rotor pump flow pressure is not enough inspection methods, hope to give you help to check the fault.
Check the flow pressure of the rotor pump is not enough: 1. When the flow of the rotor pump is too small, the pump flow and head data marked by the pump should be checked to see if the rotor pump is not matched correctly.
2. Check whether the flow is reduced due to the damage of the rotor of the rotor pump, and it should be immediately shut down for inspection, so as not to cause more losses.
3. Check whether the service life of the CAM rotor pump is too long, whether the pump is damaged too much or damaged.
4. Check whether the pipeline is damaged or leaked
Of course, the insufficient flow pressure of the rotor pump may also be not applied for a long time, the parts appear rust, oxidation, or there are foreign bodies in the pump body blocked.
Knowledge Development: CAM rotor pump is a positive displacement pump, different from other pumps, the use of all-rubber coated rotor, through the flow cavity in the operation, vacuum, self-priming capacity, therefore, compared with other types of pump, CAM rotor pump has a strong self-priming capacity.
