Thermal insulating
gear pump can be used for asphalt pump. Asphalt pump belongs to gear pump, and it is also a kind of pump. Asphalt pump is mainly used in low-flow, high-lift water systems, such as drinking water supply system, pressure boiler water supply system, high-purity water purification system. Asphalt pump generally has the advantages of high output, low energy consumption and low manufacturing cost. It can be used for heat transfer oil, steam, hot water, cold water and other media to heat, heat and cool the transported liquid and pump. It has a wide range of uses, such as chemical raw materials, filling medicine, food, cosmetics, pesticides and other industries.
The asphalt gear pump is very reliable in working, mainly in the three aspects of working life, working system and working frequency. And in terms of function, asphalt pump is not only used for extrusion and mixing of polymer materials, its use has been expanded to feed, electrodes, explosives, building materials, packaging, pulp, ceramics and other fields.
When using the asphalt gear pump, we must pay attention to:
1. The asphalt gear pump shall ensure normal operation within the fluctuation range of 15% of the rated voltage.
2. During installation, it should be noted that the arrow on the valve body should be consistent with the flow direction of the media.
3. Do not install it in a place where there is direct dripping or splashing.
4. Asphalt gear pump should be installed vertically.
5. The pipeline should be thoroughly cleaned before installation of the asphalt gear pump.
6. The medium should be free of impurities. Pre valve filter.
As long as the asphalt gear pump is used in accordance with the specifications in installation and working conditions, and the products guaranteed by large manufacturers are selected, its life can be very long and the maintenance is simple.
